Colloidal Generators Our Models & Features
DOMESTIC: We have a new single domestic generator CS1-45 capable of doing up to 3 gallons daily .
CS1-45 Comes with a pair of silver electrodes each 2” x 6”
Total cost = $1750 USD. This model can make all of the metals including colloidal gold, platinum, palladium etc.
COMMERCIAL: All our commercial generators are designed to charge large containers of 5 gallons and more, with no upper limit. Additionally, there are also bucket accessories available for $340 USD:
5 gallon pail/bucket, Crossbar to support 2 pairs of 6” x 8” plates. Submersible pump and power supply
Ring magnet attached to pump. Tap/faucet for pail. Dummy load (1000 ohms) to test the generator.
You would also be wise to buy the low range professional external Hanna microsiemens conductivity meter HI 98308 to test your water conductivity, cost from us = $140 USD because we have to import it (Available from Hannainst.com for $72). Not having this water tester meter is very unwise. It is important to be able to test the conductivity of your water before, during and after.
INDUSTRIAL: These generators use long bar electrodes enclosed in a plumbing tube of 2 inches diameter. Water is pumped through the tube thus picking up atoms.
