Laboratory Analysis:
We have received lab reports of samples of our colloidal solutions. Zeta Potential was found to be mainly around -60 millivolts with significant extension up to -100 mv. Z.P. is a measure of the quality of nanoparticles and indicates the voltage across the capacitor that is the nano-particle, which in turn indicates the amount of energy that can be released to zap a target microbe. From the diagram, it can be seen that ZP indicates only a fraction of the full voltage at the outer layer, which can be as much as 0.5 volts across 2 nanometers. This energy in volts per meter works out to be 25 million volts per meter, whereas lightning is only 1000 v/m. The diameter of our Nanoparticles averaged out at 2.5 nm, which is the same diameter as a coronavirus spike.
Because of the very small almost-atomic size of our nanoparticles, even the best labs have difficulty obtaining an accurate meaningful result. Different labs often give different results on the same sample.
To send a sample for analysis requires that you use highly pure water already devoid of nanoparticles and ions.
Also, the electrical current level should be set to the lowest level. After making your batch, it will have to be filtered to laboratory standards to remove oxide and other larger particles.
we sent our samples to Natural Immunogenics, Nanocomposix, and to Anton-Paar, http://www.biophysica.com/analysis.shtml and at
http://www.biophysica.com/about_biophysica/independent_laboratory_analysis.php
