Site is under Construction. Some part of the site you may see still in development mode. Everything will be up and running well soon. Thanks

How Do You Make Colloidal Gold?

As with any colloidal water, we start with pure non-ozonized distilled or Reverse Osmosis water.  CG needs a higher electrical current and voltage than Silver, Copper, Zinc, Magnesium.  This is why we provide a 48-volt power supply (not 24 volts).  At the same time, the water has to be seeded with something to make the water more electrically conductive, such as using Colloidal Silver water, or some Ascorbic Acid crystals in the water to raise the current level. Do not use salt which contains chloride. You must first make the water more electrically conductive in order to get a higher electrical current between the electrodes. This is best done by making colloidal silver, then using silver electrodes as the cathode (negative), use gold as the anode (positive).  Then charge the water for at least another week.  The color is clear because nano-particles are less than 10 nanometres in diameter.  Colour, such as red, would indicate larger, ineffective particles around 600 nm. The 2 gold electrodes and power supply are extra, price depending on the size of gold electrodes you would like. Ideally, 2 similar electrodes such as 1”x 1” or larger give a better result.  I use 2 inch x 6 inch (5 cm x 15 cm). Gold atoms come off the electrodes very slowly, need a full week after making colloidal silver water, and need special programming built into the generator when you switch to the Gold level.  One liter is a good quantity for gold whereas 4-5 liters is good for silver, copper, zinc, magnesium which are complete at 48 ppm within 48 hours. There is no way of accurately measuring the amount of gold or silver present in the water except by sending it to a special analytic laboratory. Gold and silver combine well synergistically together and historically were valued by the ancient alchemists as a special remedy called “Electrum” with synergistic metaphysical properties “. When making colloidal gold regularly, it would make sense to buy the two-channel model CSN2-12 which would allow gold to be made over 7 days in one batch while silver or other minerals can be made daily in the other batch.

Get 10% off use coupon WELCOMEABOARD

X